Deep Pleated High Temp HEPA Filters Stainless Steel Bear 200 - 350 ℃
Features
| Frame | Stainless Steel 304 or 201, Aluminum Alloy, Galvanized Steel, Alu board and so on |
| Filter media | Glass fiber |
| Separator | Aluminum foil corrugated |
| Gasket | Silicone or glass fiber bar |
| Sealant | Silicone glue or ceramic glue |
| Temp | for normal design it`s 250℃, or special design reach to 350℃ |
| Size | Standard or customized |
Description
This is deep pleated HEPA filter, the thickness is 150mm or 292mm; folded glass fiber material spaced by corrugated aluminum foil to create large filter area, then reducing the resistance and enlarge air flow rate;
to make the HEPA filters can bear high temperature environment, some material should be redesigned,
the gasket should be silicone not normal neoprene; the silicone can stand high temperature to 250℃; the sealant should change to silicone glue.
Frame is stainless steel 304 recommend; to protect the filter material , double side metal mesh can be added.
Technical parameters
| Design | Size | Efficiency | Air flow rate / Initial pressure drop ( m3/h / Pa ) | Media area ( m2) |
| Flange type | 287*595*292 | H13 | 1700 / 250 | 6.0 |
| 595*595*292 | H13 | 3400 / 250 | 13.0 |
| Flange type | 287*595*150 | H13 | 1200 / 250 | 2.5 |
| 595*595*150 | H13 | 2500 / 250 | 6.0 |
Pressure drop range: ±15%
According to clients` requirements offer different specifications
