
Add to Cart
High Capacity HEPA Filter For Ducted Ceiling Modules in Cleanrooms
Introduction
this high capacity HEPA filters are typically design for cleanrooms` ducted ceiling modules,
the construction is quite strong as it made of galvanized steel or stainless steel or aluminum alloy,
reinforced with rivet. mini pleated design, mulitply v cell design, maximize the filter area in limited
space;
the filters can be used in laminar airflow also can be used in weak turbulence airflow;
it`s a wonderful replacement for deep pleated HEPA filters.
they can provide smaller air pressure drop and large dust holding ability;
the service life is longer than deep pleated HEPA filters.
Specifications:
frame: aluminum alloy, galvanized steel, alu board, sus stainless steel, plywood and so on;
filter media: fine glassfibre;
efficiency: H10-H14 EN:1822 and medium efficiency F6-F9 also available;
construction: mini pleated , 3V, 4V, 5V, 6V design;
temperature: 80℃
humidity: 80% or 100%;
final pressure drop: 600Pa;
separator: hot melt;
Advantageous:
Higher air flow rate;
low resistance;
longer service life;
Strong constructions;